WE ARE YOUR POOL COVER SOURCE!

Hardware

When you order your PoolTux Safety Cover a package of installation items will be custom prepared for the size and type of cover you selected. In addition to the pool cover itself, you receive all hardware necessary to properly install your new cover. Depending on the cover you choose, your hardware package will contain these items:

Collage of Parts

Hardware: Installing Springs with D-Rings

SPG-701-505

SPG-701-505

Safety Cover Installation Rod 35“

SPG-701-5010

SPG-701-5010

Lawn Tube Assembly 18“ Aluminum

SPG-701-5011

SPG-701-5011

Deck Tube Assembly 10“ Steel

SPG-701-504

SPG-701-504

Brass Wood Deck Anchor
Assembly With Screws

SPG-701-503

SPG-701-503

Brass Anchor Collar

SPG-701-502

SPG-701-502

Bras Anchor Assembly
Male/Female

SPG-701-5012

SPG-701-5012

Tamping Pin

SPG-701-5013

SPG-701-5013

Allen Wrench 1/4“ x 9.5“

PAF-701-511

PAF-701-511

Eye Bolt 5/6“ Stainless

SPG-701-500

SPG-701-500

Stainless Steel Buckle 4 Bar

SPG-701-506

SPG-701-506

Spring Stainless Steel 7.5“ Long W/D Ring

PAF-701-5019

PAF-701-5019

Safety Cover Storage Bag – Standard

Hardware: Installing Springs with D-Rings

D-Ring Step 1

Step 1:

Pass the strap under the front of the spring and through the middle of the d-ring.

D-Ring Step 2

Step 2:

Loop the strap over the top of the d-ring and back under the front of the spring and pull tight.

Hardware: Assembly of the Spring Assembly

  1. Step 1 Begin with a strap, a buckle, and a standard spring. The buckle should sit with the ridges facing up.
  2. Step 2 Insert the strap, from the bottom, into the first section of the buckle.
  3. Step 3 Weave the strap into the middle section of the buckle.
  4. Step 4 Slide on the triangle end of the spring. Make sure the hooks of the spring are facing up, so they don't scrape on the concrete.
  5. Step 5
  6. Step 6
  7. Step 7